Documented results from real operating environments.

Case studies showing how Fluidstream technology performs in demanding oilfield service, restoring production, reducing venting, improving uptime, and lowering maintenance in wet, unstable, and freeze-prone applications.

Browse Case Studies

5 case studies shown
MultiphaseCommander™
Alberta, Canada

MultiphaseCommander™ Production Optimization

A gas-driven MultiphaseCommander™ reduced backpressure, handled slugs and wide variable flow, and restored two nearly dead wells without adding separation-first infrastructure.

~10e3 m³/day gas restored
C$1.5M+ incremental annual revenue
~95e3 m³/day peak gas flow
Best for readers evaluating liquid-loaded wells, plunger-lift limits, variable multiphase flow, and production recovery without a larger facility build.
Casing Gas Compression Multiphase Production Production Gain Equipment Reliability
VaporCommander™
Alberta, Canada

VaporCommander™ 4.5+ Year Reliability

VaporCommander™ operated in wet gas service through harsh Alberta winters, reaching approximately 35 months before the first seal change and continuing with negligible maintenance.

4.5+ years operation
35 months to first seal change
1 seal change to date
A strong reliability story for operators concerned about wet gas, seal life, cold-weather performance, and maintenance-heavy conventional VRUs.
Vapor Recovery Equipment Reliability Cold / Winter Conditions
VaporCommander™
Southern Alberta, Canada

VaporCommander™ Vapor Combustor Replacement

Instead of burning tank vapors, VaporCommander™ captured approximately 500,000 m³ of natural gas over 12 months and created more than C$46,000/year in estimated gas value.

500k m³/year gas captured
C$46k+ estimated annual gas value
0 cold-weather stoppages
Built for readers comparing VCUs, conventional VRUs, carbon exposure, active pressure control, and recovered gas economics.
Vapor Recovery Emissions Reduction
VaporCommander™
Alberta, Canada

Allied Energy II — VaporCommander™

Allied Energy II used VaporCommander™ to eliminate tank gas venting while operating through wet gas, variable gas flow, and winter conditions without service intervention.

100% uptime since install
16+ months at report date
0 maintenance or service
A concise proof point for operators needing emissions compliance, wet-gas tolerance, low-touch operation, and winter reliability.
Vapor Recovery Equipment Reliability Emissions Reduction
VaporCommander™
Saskatchewan, Canada

Whitecap Resources — VaporCommander™

Whitecap Resources deployed VaporCommander™ units for vapor recovery in Saskatchewan facilities where cold-weather reliability, entrained liquids, low suction pressure, and minimal operator intervention were key requirements.

0% reported downtime
5 min routine filter change
2+ units installed / planned
A strong fit for readers evaluating VRUs in cold climates, liquid-prone vapor streams, remote facilities, and applications where conventional dry-gas VRUs create winter maintenance risk.
Vapor Recovery Equipment Reliability Cold / Winter Conditions
No case studies matched the selected filters. Clear the filters and try again.